Cr5 Batteries Is This The Problem With My Brothers Broken Amp?? (it's The Circuit)?
Is this the problem with my brothers broken amp?? (it's the circuit)? - cr5 batteries
k check this out, my brother's Fender amp blew a fuse and if we have a new backup of the explosion at the time .. Obviously, as we have seen online, so with the amp model you have in common. and he could get a schematic representation of the amplifier and that is what happened:
http://www.manualnguide.com/dl/10178/
You need the button to download and play back high
Look CR5 and CR6 room near the main amplifier circuit at the bottom. I have found in the circuit, that these diodes were found exhausted. I tested with a 9V battery and my multimeter and the current flow both directions, with an altitude difference of more than half a volt. These LEDs actually prevent a short circuit correct? Well, because they do not, that wHat caused the fuse to blow and at the same breath? and if I replace these diodes classification or a higher voltage / current (though I think) 23 volt power of breath in order to solve the problem?
|
3 comments:
TC5 and TC6 pulled protect the amplifier output power on the supply rails with induction Kick, "the spokesman said, and the fact that he was acting as a generator. CR 5 a.m. to 6 p.m. are 1N4003 investment at 200 volts and 1 amp continuously rated. You can try replace it with 1N5402. (www.digikey.com)
Please give us the actual connection. The regime has not offered.
Help diodes, but probably only 23 volts, replace. Use 1N4007/8/9 series.
But the cause of the diodes blow. Normally they do not. I suspect that a cover of electrolyte diodes are in the vicinity. Look for physical signs of a leak or just replace the covers, they can with age.
Why do you have a link to a virus?
Post a Comment